AudioCodes Mediant 3000 Manual do Utilizador descarregar pdf (Página 71)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 71 June 2013

4.14 Step 14: Configuring a Registration Account

This step shows how to configure SIP registration accounts (in the Account Table page) so

that the E-SBC can register with the SIP Trunk on behalf of Lync Server 2013.

Note: Not all SIP Trunks require registration (and authentication) to provide service. If

your SIP Trunk doesn't require registration, skip this step.

In this example, the Served IP Group is Lync Server 2013 (IP Group 1) and the Serving IP

Group is SIP Trunk (IP Group 2).

 To configure a registration account:

1. Open the Account Table page (Configuration tab > VoIP > SIP Definitions >

Account Table).

Figure 4-40: Configuring a SIP Registration Account

2. Enter an index number (1) and click Add.

3. Configure the account according to the information provided by the SIP Trunk

provider, for example:

Parameter Example Setting

Served IP Group "1" (i.e., Lync Server 2013)

Serving IP Group "2" (i.e., SIP Trunk)

Username (Provided by the SIP Trunk provider)

Password (Provided by the SIP Trunk provider)

Yes

Application Type

SBC

4. Click Apply.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 79 80

Sem comentários

AudioCodes Mediant 3000 Manual do Utilizador Página 71