AudioCodes MP-1FXS Manual do Utilizador descarregar pdf (Página 9)

Configuring Analog Extensions with AudioCodes Gateways Page 9 of 25

5. Select VoIP > Media > Analog Settings. Configure the settings as follows:

Note: The AudioCodes device requires a reboot after you change either of these settings. You can reboot once

all configuration is complete, during the last step on page 17.

6. Select VoIP > Control Network > Proxy Sets Table. Configure Proxy Set ID 0 as follows:

Figure 12: Configure the proxy IP address and transport type

• Set Proxy Address 1 to 10.40.1.43:10060 (The

MaxCS public IP address and port). Set its

Transport Type to UDP.

• Set Enable Proxy Keep Alive to Disable.

• Set Min. Hook-Flash Detection Period [msec] to 300.

• Set Max. Hook-Flash Detection Period [msec] to 800.

Figure 11: Configure the minimum and maximum detection periods

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Sem comentários

AudioCodes MP-1FXS Manual do Utilizador Página 9