AudioCodes Mediant 1000 Manual de Instalação descarregar pdf (Página 21)

Version 6.0 21 February 2010

Installation Manual 2. Installing the Device

2.4.3 Connecting to FXS/FXO Interfaces

The procedure below describes the cabling of the device's FXS and FXO module analog

interfaces.

Warnings:

• To protect against electrical shock and fire, use a 26 AWG min wire to

connect FXO ports to the PSTN.

• Ensure that FXS and FXO ports are connected to the appropriate,

external devices; otherwise, damage to the device can occur.

¾ To connect the FXS /FXO interfaces:

 Using the device's RJ-11 connectors on the FXS/FXO module, connect the device to

the required telephone interfaces:

• FXS: connect the FXS module's ports to fax machines, modems, and/or

telephones.

• FXO: connect the FXO module's ports to telephone exchange analog lines or

PBX extensions.

The RJ-11 connector pinouts are shown in the figure below:

Figure 2-8: RJ-11 Connector Pinouts

2.4.4 Connecting the Analog Lifeline Phone

The device's FXS modules provide a Lifeline phone connection on Port I. The Lifeline

provides a wired analog POTS phone connection to any PSTN or PBX, which provides

PSTN connectivity upon a power outage or when the network connection fails. For each

FXS module installed in the device, you can configure one Lifeline phone connection (using

Port I).

Notes:

• Analog Lifeline is supported only by the FXS modules.

• The Lifeline feature activated upon network failure can be disabled using

the LifeLineType ini file parameter (described in the device's User's

Manual).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

Sem comentários

AudioCodes Mediant 1000 Manual de Instalação Página 21