AudioCodes MP-1FXO Manual do Utilizador descarregar pdf (Página 45)

100

101

SIP User's Manual 4. Getting Started

Version 5.0 45 December 2006

4.2.4.2 Assign an IP Address

¾ To assign an IP address via the CLI, take these 4 steps:

1. At the prompt type ‘conf’ and press enter; the configuration folder is accessed.

2. To check the current network parameters, at the prompt, type GCP IP, and then press

Enter; the current network settings are displayed.

3. Change the network settings by typing:

SCP IP [ip_address] [subnet_mask] [default_gateway]

(e.g., ‘SCP IP 10.13.77.7 255.255.0.0 10.13.0.1’); the new settings take effect on-the-

fly. Connectivity is active at the new IP address.

Note: This command requires you to enter all three network parameters (each

separated by a space).

4. To save the configuration, at the prompt, type SAR, and then press Enter; the

MediaPack restarts with the new network settings.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 389 390

Comentários a estes Manuais

Sem comentários

AudioCodes MP-1FXO Manual do Utilizador Página 45

Comentários a estes Manuais

Manuais e produtos relacionados com Redes AudioCodes MP-1FXO