AudioCodes MP-1FXO Manual do Utilizador Página 160
- Página / 236
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
MP-1xx H.323
MP-1xx H.323 User’s Manual 160 Document #: LTRT-65104
8.9 Metering Tones Relay
The MP-1xx FXS and FXO gateways can be used to relay standard 12 or 16 kHz metering tones
over the IP network as illustrated in Figure
8-1 below.
Figure
8-1: Metering Tone Relay Architecture
After a call is established between the FXS and FXO gateways, the PSTN generates 12 or 16
kHz metering tones towards the FXO gateway. The FXO gateway detects these pulses and
relays them, over IP, to the FXS gateway using a non-standard data in an H.225 Facility
message. The FXS gateway generates the same pulses to the connected phone.
The parameter ‘MeteringType’ (described in Table
5-28) is used to determine the frequency of the
metering tone (12 kHz (default) or 16 kHz). In addition, the correct (12 or 16 kHz) coefficient file
must be used for both FXS and FXO gateways.
To enable this feature configure ‘SendMetering2IP = 1’.
- MP-1xx H.323 User’s Manual 1
- Contents 3
- Table of Contents 3
- List of Figures 8
- MP-1xx H.323 10
- List of Tables 10
- Trademarks 13
- Customer Support 13
- Related Documentation 13
- 1 Overview 15
- 1.3 MP-1xx Features 18
- 1.3.3.2 Call Setup 19
- 1.3.3.3 General 19
- 2.1 MP-1xx Front Panel 21
- 2.2 MP-1xx Rear Panel 22
- 2.2.2 MP-124 Rear Panel 23
- 3 Installing the MP-1xx 25
- 3.3 Mounting the MP-1xx 26
- of the 27
- 3.4 Cabling the MP-1xx 29
- 4 Getting Started 35
- 4.1 on page 35) 37
- 4-1: Quick Setup Screen 37
- 5 Configuring the MP-1xx 39
- 5.4 Password Control 40
- Appendix E on 42
- Appendix E on page 211 42
- 4.2 on page 36 42
- 5.8 on page 44) 42
- 5.8.11 on page 102) 42
- 5.10 on page 124) 43
- 5.11 on page 131) 43
- 5.12 on page 140) 43
- 5.8 Protocol Management 44
- Version 4.4 47 March 2005 47
- Version 4.4 49 March 2005 49
- 5.8.4.2 on page 74) 49
- Version 4.4 53 March 2005 53
- Version 4.4 55 March 2005 55
- 5.8.2.1 General Parameters 57
- Version 4.4 59 March 2005 59
- Version 4.4 61 March 2005 61
- Version 4.4 63 March 2005 63
- 5.8.8.4 on page 95 63
- 8.5.7 on page 63
- 5.8.8.4 on page 95) 65
- 5.8.8.3 on page 94) 65
- 5.8.8.2 on page 93) 65
- 5.8.8.3 on page 94 67
- Version 4.4 69 March 2005 69
- 5-10: NPI/TON values 71
- 5-12) 75
- 5.8.7 on page 90 77
- 5.8.8.5 on page 77
- 5.8.4.4 Internal DNS Table 79
- Version 4.4 81 March 2005 81
- 5.8.5.1 on 85
- 5-26: Channel Select Modes 99
- 5.8.7 on page 90) 99
- Version 4.4 101 March 2005 101
- Version 4.4 103 March 2005 103
- Parameter Description 103
- 5.9 Advanced Configuration 104
- 5.12 on page 105
- 5.9.4 Regional Settings 122
- 5.10.1 Gateway Statistics 124
- 5-38 shows the 125
- Version 4.4 129 March 2005 129
- 5.10.4 System Information 131
- 5.11.1 below) 132
- 5.11.2 on page 138) 132
- 5-44) 133
- 5-45) 133
- 5-48: FINISH Screen 137
- 5-49: ‘End Process’ Screen 137
- 5.11.2 Auxiliary Files 138
- 5.12 Save Configuration 140
- 5.13 Resetting the MP-1xx 141
- 6.1 Secured ini File 143
- 6.2 Modifying an ini File 143
- 6.3 The ini File Structure 144
- 7 Configuration Files 145
- 7.2.1 PRT File Format 149
- RxDTMFOption parameter 153
- 8.4.3 Relevant Parameters 155
- 8.5.3 Call Transfer 156
- 8.5.4 Call Forward 156
- 8.5.5 Call Waiting 157
- 8.5.7 Name Identification 157
- 8.8 Call Detail Report 159
- 8.9 Metering Tones Relay 160
- 8.10 Configuration Examples 161
- Dialing Mode’ to ‘Two Stage’ 165
- IsTwoStageDial=1) 165
- 9 Diagnostics 167
- 9.3 Syslog Support 169
- 10 BootP/DHCP Support 171
- 10.2 DHCP Support 173
- 5.9.2.1 on page 120 174
- 11 SNMP-Based Management 177
- 11.1.2 SNMP MIB Objects 178
- 11.3 Cold Start Trap 179
- Measurements 180
- 11.5 Supported MIBs 180
- 11.6 SNMP Interface Details 182
- 11.6.1 SNMP Community Names 183
- 11.6.2 Trusted Managers 184
- 11.6.3 SNMP Ports 185
- B.2 An Overview of BootP 195
- B.3 Key Features 195
- B.4 Specifications 196
- B.5 Installation 196
- Log Window 197
- B.9 Log Window 198
- B.10.1 BootP Preferences 199
- B.10.2 TFTP Preferences 200
- B.11.1 Adding Clients 201
- B.11.2 Deleting Clients 202
- B.11.4 Testing the Client 202
- B.11.6 on page 204 203
- Allocation 207
- D.1 Fax/Modem Settings 209
- D.4 Supporting V.34 Faxes 210
- Interface 211
- E.4 on page 213
- 6.2 on page 213
- 6.2 on 214
- 5.6 on page 41) 215
- F.1 below) 217
- F.1.3 on page 220) 217
- F.1.1 on page 218) 217
- F.1.2 on page 219) 217
- 6.1 on page 143 219
- F.2.2 Installation 222
- F.2.3 Initial Settings 222
- Appendix G SNMP Traps 227
- G.1.4 Other Traps 230
- G.1.5 Trap Varbinds 230
- H.1 MP-11x FXS 231
- H.2 MP-11x FXO 232
- Safety Notice 233
- Industry Canada Notice 233
- Network Compatibility 233
- Telecommunication Safety 233
- H.3 MP-124 234
- FCC Statement 235
- AudioCodes Offices 236
Manuais e produtos relacionados com Redes AudioCodes MP-1FXO
Redes AudioCodes MP-201B Manual do Utilizador
(15 páginas)
(15 páginas)
Redes AudioCodes MP-1FXO Manual do Utilizador
(390 páginas)
(390 páginas)
Redes AudioCodes MP-20x Guia de Instalação
(26 páginas)
(26 páginas)
Redes AudioCodes MEDIAPACK VERSION 6.2 Especificações
(178 páginas)
(178 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais