AudioCodes Mediant 3000 Manual do Utilizador descarregar pdf (Página 31)

Microsoft Lync and ThinkTel SIP Trunk 31 June 2012

Microsoft Lync and ThinkTel SIP Trunk 4. Configuring the E-SBC Device

2. Select the 'Index' radio button corresponding to the Application Type OAMP + Media

+ Control (i.e., LAN) and click Edit.

Set these parameters:

• IP-Address: <E-SBC IP-Address> (e.g., 10.15.45.201)

• Prefix Length: <Subnet Mask in bits> (e.g., 16 for 255.255.0.0)

• Gateway: <Gateway Default Gateway> (e.g., 10.15.0.1)

• VLAN ID: < Vlan ID number> (e.g., 1)

• Interface Name: <Internal Name> (i.e., Voice)

• Primary DNS Server IP Address: <DNS IP-Address> (e.g., 10.15.9.10).

• Secondary DNS Server IP Address: <DNS IP-Address>

• Underlying Interface:<Group number> (e.g., GROUP_1)

3. Add another network interface (for the WAN side). Enter 1 and press ‘Add Index’

4. Set these parameters:

• Application Type: Media + Control

• IP-Address: <WAN IP-Address> (e.g., 195.189.192.151).

• Prefix Length: <Subnet Mask in bits> (e.g., 16 for 255.255.0.0).

• Gateway: < DG Router’s IP Address> (e.g., 195.189.192.129).

• VLAN ID: < Wan Vlan ID number> (e.g., 2)

• Interface Name: <Wan Name> (e.g., WanSP)

• Primary DNS Server IP Address: <DNS IP-Address> (e.g., 80.179.52.100).

• Secondary DNS Server IP Address: <DNS IP-Addr> (e.g., 80.179.55.100).

• Underlying Interface:<Group number> (e.g., GROUP_2)

5. Click Apply and Don

4.1.2 Set the Native VLAN ID

¾ To configure the Ports table:

1. Open the Physical Ports Settings page (Configuration> VoIP > Network > Physical

Ports Settings).

2. In the GROUP_1 member ports set the ‘Native Vlan’ to 1 (that's assigned to network

interface Voice).

3. In the GROUP_2 member ports set the ‘Native Vlan’ to 2 (that's assigned to network

interface WanSP).

Figure 4-4: Ports Native VLAN

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 62 63

Sem comentários

AudioCodes Mediant 3000 Manual do Utilizador Página 31