AudioCodes Mediant 3000 Manual do Utilizador descarregar pdf (Página 34)

Microsoft Lync and ThinkTel SIP Trunk

AudioCodes Mediant E-SBC Series 34 Document #: LTRT-38110

¾ To configure an External Media Realm:

1. Open the SIP Media Realm Table page (Configuration > VoIP > Media > Media

Realm Configuration).

2. Click Add.

3. In the 'Index' field, enter 2.

4. In the 'Media Realm Name' field, enter a name (e.g., WanRealm).

5. In the 'IPv4 Interface Name' field, select interface name WanSP.

6. In the 'Port Range Start' field, enter a number that represents the lowest UDP port

number that will be used for media in the WAN (e.g., 7000).

7. In the 'Number of Media Session Legs' field, define the number of media sessions that

are assigned with the port range (e.g., 10).

Figure 4-8: External Media Realm Configuration

8. Click Submit.

4.3.2 Configuring SRDs

¾ To configure an Internal SRD:

1. Open the SRD Table page (Configuration > VoIP > Control Network > SRD Table).

2. Add an entry with index 1 to the SRD table. This will represent the SBC’s internal

interface (towards the Lync Server).

3. Assign descriptive name to the interface entry (e.g., LanSRD).

4. Enter the 'Media Realm' field value (e.g., LanRealm).

Figure 4-9: Internal SRD Configuration

5. Click Submit.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 62 63

Sem comentários

AudioCodes Mediant 3000 Manual do Utilizador Página 34