AudioCodes Mediant 3000 Manual do Utilizador descarregar pdf (Página 33)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 33 AudioCodes Mediant E-SBC

4.1.1 Step 1a: Configure Network Interfaces

This step describes how to configure the IP network interfaces for each of the following

interfaces:



LAN VoIP (assigned the name "Voice")



WAN VoIP (assigned the name "WANSP")

 To configure the IP network interfaces:

1. Open the IP Interfaces Table page (Configuration tab > VoIP menu > Network > IP

Interfaces Table).

2. Modify the existing LAN network interface:

a. Select the 'Index' radio button of the OAMP + Media + Control table row, and

then click Edit.

b. Configure the interface as follows:

Parameter Value

IP Address

10.15.45.11 (IP address of E-SBC)

Prefix Length

16 (subnet mask in bits for 255.255.0.0)

Gateway

10.15.0.1

VLAN ID

Interface Name

Voice (arbitrary descriptive name)

Primary DNS Server IP Address

10.15.25.1

Underlying Interface

GROUP_1 (Ethernet port group)

3. Add a network interface for the WAN side:

a. Enter 1, and then click Add Index.

b. Configure the interface as follows:

Parameter Value

Application Type

Media + Control

IP Address

195.189.192.155 (WAN IP address)

Prefix Length

16 (for 255.255.0.0)

Gateway

195.189.192.129 (router's IP address)

VLAN ID

Interface Name

WANSP

Primary DNS Server IP Address

80.179.52.100

Secondary DNS Server IP Address

80.179.55.100

Underlying Interface

GROUP_2

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 77 78

Comentários a estes Manuais

Sem comentários

AudioCodes Mediant 3000 Manual do Utilizador Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores AudioCodes Mediant 3000