AudioCodes MEDIAPACK VERSION 6.2 Manual do Utilizador descarregar pdf (Página 47)

User's Manual 4. Initial Configuration

Version 2.2 47 July 2007

d. Verify the new LAN IP settings by using the following command:

<Newly assigned IP>(IF-IP)[LAN]# show ip interface LAN <CR>

5. Configure the WAN interface IP address, by performing the following:

a. From the main configuration mode, enter the “ip_interface” mode using the

following command:

192.168.2.1<cfg># ip_interface WAN <CR>

b. Configure the WAN interface mode (Static, DHCP, or PPPoE):

♦ Static IP (similar to the LAN static IP configuration):

a. Change the interface mode to Static using the following command:

192.168.2.1<if-ip>[WAN]#ipmode static <CR>

b. Configure the static IP address using the following command:

192.168.2.1<if-ip>[WAN]#ipaddress <ip-address> <ip-

mask> <CR>

c. Enable the new configuration by typing the following command:

192.168.2.1(IF-IP)[WAN]# shutdown <CR>

192.168.2.1(IF-IP)[WAN]# no shutdown <CR>

d. Verify the new WAN IP settings by typing the following command:

192.168.2.1(if-ip)[WAN]# show ip interface WAN <CR>

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 179 180

Sem comentários

AudioCodes MEDIAPACK VERSION 6.2 Manual do Utilizador Página 47