AudioCodes MEDIAPACK VERSION 6.2 Manual do Utilizador descarregar pdf (Página 4)

CTM; Reviewed:

SPOC 11/29/2007

Solution & Interoperability Test Lab Application Notes

4 of 51

AudioCodesMP118.doc

2. Equipment and Software Validated

The following equipment and software/firmware were used for the sample configuration provided:

Equipment Software/Firmware

Avaya S8300 Media Server with Avaya G350

Media Gateway

Avaya Communication Manager 3.1.2

(R013x.01.2.635.0)

This is a post-GA build needed to

support T.38 fax with the MP-118.

Avaya SIP Enablement Services (SES) 3.1 (build 18)

Avaya 4620SW IP Telephones SIP version 2.2.2

H.323 version 2.3

Avaya 6408D Digital Telephone -

Analog Telephones -

Analog Fax Machines -

Windows PCs Windows XP Professional

AudioCodes MP-118 Analog VoIP Gateway 5.00A.011.008

3. Configure Avaya Communication Manager

The communication between Avaya Communication Manager and Avaya SES is via a SIP trunk

group. All SIP signaling for calls between Avaya Communication Manager and the MP-118 passes

through Avaya SES via this trunk group. This section describes the steps for configuring this trunk

group and associated signaling group. In addition, this section describes the configuration of stations

as OPS stations, which is required for each analog telephone, and fax machine connected to the MP-

118.

The following configuration of Avaya Communication Manager was performed using the System

Access Terminal (SAT). After the completion of the configuration in this section, perform a save

translation command to make the changes permanent.

1 2 3 4 5 6 7 8 9 ... 50 51

Sem comentários

AudioCodes MEDIAPACK VERSION 6.2 Manual do Utilizador Página 4