AudioCodes MediaPack MP-124 Manual do Utilizador descarregar pdf (Página 50)

Microsoft Lync Server 2013 50 Document #: LTRT-40127

Enhanced Gateway with Analog Devices

4.12 Step 12: Configuring Enhanced Gateway Routing

The procedure below describes how to route calls between the IP side (i.e., Lync Server

and SBC entity) to the Trunk Side (e.g., PRI) in the Gateway entity.

4.12.1 Configuring IP-to-Trunk Group Routing

The procedure below describes how to configure an IP-to-Trunk Group routing rule,

whereby all incoming calls (i.e., from Mediation server or SBC entity) are routed to Trunk

Group 1 (which you configured in Section 4.11.1 on page 45).

 To configure an IP-to-Trunk Group routing rule:

1. Open the Inbound IP Routing Table page (Configuration tab > VoIP menu > GW and

IP to IP > Routing > IP to Trunk Group Routing).

Figure 4-28: Inbound IP Routing Table Page

2. In the first table entry row, enter the asterisk (*) sign in the 'Dest. Phone Prefix' and in

the 'Source Phone Prefix' fields.

3. In the 'Trunk Group ID' field, enter the Trunk Group to where the calls must be routed.

4. Click Submit to apply your changes.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 97 98

Sem comentários

AudioCodes MediaPack MP-124 Manual do Utilizador Página 50