AudioCodes MediaPack 114 Manual do Utilizador descarregar pdf (Página 171)

Version 5.6 171 November 2008

SIP User's Manual 3. Web-Based Management

¾ To configure coder groups, take these 11 steps:

1. Open the 'Coder Group Settings' page (Configuration tab > Protocol Configuration

menu > Profile Definitions submenu > Coder Group Settings page item).

Figure 3-76: Coder Group Settings Page

2. From the 'Coder Group ID' drop-down list, select a coder group ID.

3. From the 'Coder Name' drop-down list, select the first coder for the coder group.

4. From the 'Packetization Time' drop-down list, select the packetization time (in msec)

for the coder. The packetization time determines how many coder payloads are

combined into a single RTP packet.

5. From the 'Rate' drop-down list, select the bit rate (in kbps) for the coder you selected.

6. In the 'Payload Type' field, if the payload type for the coder you selected is dynamic,

enter a value from 0 to 120 (payload types of 'well-known' coders cannot be modified).

The payload type identifies the format of the RTP payload.

7. From the 'Silence Suppression' drop-down list, enable or disable the silence

suppression option for the coder you selected.

8. Repeat steps 3 through 7 for the second to fifth coders (optional).

9. Repeat steps 2 through 8 for the second to fourth coder groups (optional).

10. Click the Submit button to save your changes.

11. To save the changes to flash memory, refer to ''Saving Configuration'' on page 209.

3.4.4.5.2 Tel Profile Settings

The 'Tel Profile Settings' page allows you to define up to nine different Tel Profiles. You can

then assign these Tel Profiles to the device's channels (in the 'Endpoint Phone Number

Table' page), thereby applying different behaviors to different channels (i.e., ports).

Note:

You can also configure Tel Profiles using the ini file table parameter TelProfile

(refer to ''SIP Configuration Parameters'' on page 260).

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 389 390

Sem comentários

AudioCodes MediaPack 114 Manual do Utilizador Página 171