AudioCodes MediaPack 114 Manual do Utilizador descarregar pdf (Página 280)

SIP User's Manual 280 Document #: LTRT-65411

MediaPack Series

4.4.10 Analog Telephony Parameters

The analog telephony-related ini file configuration parameters are described in the table

below.

Table 4-10: Analog Telephony ini File Parameters

Parameter Description

Prefix2ExtLine

Defines a string prefix (e.g., '9' dialed for an external line) that

when identified causes the device's FXS port to play a secondary

dial tone and then restart digit collection.

The valid range is a 1-character string. The default is an empty

string.

Note: This parameter is applicable only to FXS interfaces.

PrecedenceRingingType

For a description of this parameter, refer to ''Supplementary

Services'' on page 138.

FXONumberOfRings

Defines the number of rings before the device's FXO interface

answers a call.

When set to 0, the FXO seizes the line after one ring. When set to

1, the FXO seizes the line after two rings.

The valid range is 0 to 255. The default is 0 seconds.

Note: If caller ID is enabled, and if the number of rings defined by

the parameter RingsBeforeCallerID is greater than the number of

rings defined by this parameter, the greater value is used.

CountryCoefficients

Determines the FXO line characteristics (AC and DC) according to

USA or TBR21 standard.

 [66] = TBR21

 [70] = United States (default)

ChargeCode

This ini file table parameter configures metering tones (and their

time intervals) that the device's FXS interface generates to the Tel

side.

The format of this parameter is as follows:

[ChargeCode]

FORMAT ChargeCode_Index = ChargeCode_EndTime1,

ChargeCode_PulseInterval1, ChargeCode_PulsesOnAnswer1,

ChargeCode_EndTime2, ChargeCode_PulseInterval2,

ChargeCode_PulsesOnAnswer2, ChargeCode_EndTime3,

ChargeCode_PulseInterval3, ChargeCode_PulsesOnAnswer3,

ChargeCode_EndTime4, ChargeCode_PulseInterval4,

ChargeCode_PulsesOnAnswer4;

[\ChargeCode]

Where,

 EndTime = Period (1 - 4) end time.

 PulseInterval = Period (1 - 4) pulse interval.

 PulsesOnAnswer = Period (1 - 4) pulses on answer.

For example:

[ChargeCode]

ChargeCode 1 = 7,30,1,14,20,2,20,15,1,0,60,1;

ChargeCode 2 = 5,60,1,14,20,1,0,60,1;

ChargeCode 3 = 0,60,1;

ChargeCode 0 = 6, 3, 1, 12, 2, 1, 18, 5, 2, 0, 2, 1;

[\ChargeCode]

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 389 390

Comentários a estes Manuais

Sem comentários

AudioCodes MediaPack 114 Manual do Utilizador Página 280

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores AudioCodes MediaPack 114