AudioCodes MediaPack 114 Manual do Utilizador descarregar pdf (Página 283)

Version 5.6 283 November 2008

SIP User's Manual 4. ini File Configuration

Parameter Description

FwdInfo 3 = 3,2005,30,2,$$;

[\FwdInfo]

Notes:

 The indexing of this parameter starts at 1.

 The device ports starts at 0.

 This parameter can appear up to 24 times for MP-124.

 To configure the Call Forward table using the Web interface,

refer to ''Call Forward'' on page 178.

 For an explanation on ini file table parameters, refer to

''Structure of ini File Table Parameters'' on page 233.

EnableCallerID

This ini file table parameter configures Caller ID permissions. The

format of this parameter is as follows:

[EnableCallerID]

FORMAT EnableCallerID_Index = EnableCallerID_IsEnabled,

EnableCallerID_Port, EnableCallerID_Module;

[\EnableCallerID]

Where,

 IsEnabled = Enables [1] or disables [0] (default) Caller ID.

 Port = Port number.

 Module = Module number (0-5) N/A.

For example:

[EnableCallerID]

EnableCallerID 1 = 1,3,$$;

EnableCallerID 2 = 0,$$,$$;

[\EnableCallerID]

Notes:

 The indexing of this ini file table parameter starts at 1.

 The numbering of ports starts at 0.

 If a port isn't configured, its Caller ID generation / detection are

determined according to the global parameter EnableCallerID

(described in ''Supplementary Services'' on page 138).

 This parameter can appear up to 8 times for 8-port devices and

up to 24 times for MP-124 devices.

 To configure Call ID Permissions using the Web interface, refer

to ''Caller ID Permissions'' on page 179.

 For an explanation on ini file table parameters, refer to

''Structure of ini File Table Parameters'' on page 233.

EnableDIDWink