AudioCodes MediaPack 114 Manual do Utilizador descarregar pdf (Página 204)

SIP User's Manual 204 Document #: LTRT-65411

MediaPack Series

Table 3-54: SNMP Community Strings Parameters Description

Parameter Description

Community String

 Read Only [SNMPReadOnlyCommunityString_x]: Up to five

read-only community strings (up to 19 characters each). The

default string is 'public'.

 Read / Write [SNMPReadWriteCommunityString_x]: Up to

five read / write community strings (up to 19 characters each).

The default string is 'private'.

Trap Community String

[SNMPTrapCommunityString]

Community string used in traps (up to 19 characters).

The default string is 'trapuser'.

3.5.1.1.3 Configuring SNMP V3 Users

The 'SNMP V3 Settings' page allows you to configure authentication and privacy for up to

10 SNMP v3 users.

¾ To configure the SNMP v3 users, take the following 6 steps:

1. Access the 'Management Settings' page, as described in ''Configuring the

Management Settings'' on page 199.

2. In the 'S

NMP V3 Table' field, click the right-pointing arrow

button; the 'SNMP V3

Settings' page appears.

Figure 3-95: SNMP V3 Setting Page

3. To add an SNMP v3 user, in the 'Add' field, enter the desired row index, and then click

Add. A new row appears.

4. Configure the SNMP V3 Setting parameters according to the table below.

5. Click the Apply button to save your changes.

6. To save the changes, refer to ''Saving Configuration'' on page 209.

Notes:

• For a description of the web interface's table command buttons (e.g.,

Duplicate and Delete), refer to ''Working with Tables'' on page 32.

• You can also configure SNMP v3 users using the ini file table parameter

SNMPUsers (refer to ''SNMP Parameters'' on page 258).

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 389 390

Sem comentários

AudioCodes MediaPack 114 Manual do Utilizador Página 204