AudioCodes MediaPack 114 Manual do Utilizador descarregar pdf (Página 85)

Version 5.6 85 November 2008

SIP User's Manual 3. Web-Based Management

¾ To activate a de-activated rule, take these 2 steps:

1. In the 'Edit Rule' column, select the de-activated rule that you want to activate.

2. Click the Activate button; the rule is activated.

¾ To de-activate an activated rule, take these 2 steps:

1. In the 'Edit Rule' column, select the activated rule that you want to de-activate..

2. Click the DeActivate button; the rule is de-activated.

¾ To delete a rule, take these 3 steps:

1. Select the radio button of the entry you want to activate.

2. Click the Delete Rule button; the rule is deleted.

3. To save the changes to flash memory, refer to ''Saving Configuration'' on page 209.

Table 3-21: I

nternal Firewall Parameters

Parameter Description

Is Rule Active A read-only field indicating whether the rule is active or not.

Note: After device reset, all rules are active.

Source IP

[AccessList_Source_IP]

IP address (or DNS name) of source network, or a specific host.

Subnet Mask

[AccessList_Net_Mask]

IP network mask - 255.255.255.255 for a single host or the

appropriate value for the source IP addresses. The IP address of the

sender of the incoming packet is bitwise ANDed with this mask and

then compared to the field 'Source IP'.

Local Port Range

[AccessList_Start_Port]

[AccessList_End_Port]

The destination UDP/TCP ports (on this device) to which packets are

sent.

The valid range is 0 to 65535.

Note: When the protocol type isn't TCP or UDP, the entire range must

be provided.

Protocol

[AccessList_Protocol]

The protocol type (e.g., UDP, TCP, ICMP, ESP or 'Any'), or the IANA

protocol number (in the range of 0 (Any) to 255).

Note: This field also accepts the abbreviated strings 'SIP' and 'HTTP'.

Specifying these strings implies selection of the TCP or UDP

protocols, and the appropriate port numbers as defined on the device.

Packet Size

[AccessList_Packet_Size]

Maximum allowed packet size.

The valid range is 0 to 65535.

Note: When filtering fragmented IP packets, this field relates to the

overall (re-assembled) packet size, and not to the size of each

fragment.

Byte Rate

[AccessList_Byte_Rate]

Expected traffic rate (bytes per second).

Burst Bytes

[AccessList_Byte_Burst]

Tolerance of traffic rate limit (number of bytes).

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 389 390

Comentários a estes Manuais

Sem comentários

AudioCodes MediaPack 114 Manual do Utilizador Página 85

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores AudioCodes MediaPack 114